Overview and download of Whatsminer M10 dashboard repair guide manual


Whatsminer M10 Hashboard repair guide

(Chinese version)

The M10 hash board contains 35 chips in series, with 3 chips in each group. Chip model: 1800, 105 chips on the whole board

Each set of voltage is provided by independent LDO 1.8V and 0.9V voltage

The M10 hash board has a 24M clock crystal, a temperature sensor and an eeprom to form the signal group of the entire hash board.

Signal direction: CLK-RXD-RST is transferred from U1 chip to U105, TXD is reversed from U105 to U1

1 (3)_副本.jpg

The test point is: RST-CTS-RXD-TXD-CLK.

As follows

A = test point location

B = test point name

1 (2)_副本_副本.jpg

Normal parameters measured:

CLK = 1.8V

RXT = 1.8V

TXD = 1.8V

RST = pull up 1.8V, pull down 0V

For more instructions, please download the "M10 Hash Board Repair Guide":

Click to download: WhatsMiner M10 Hash Board Repair Guide

Related maintenance tools:

ANLIXIN-862D High Quality Desoldering Station Combination Tool

Medium temperature solder paste

Maintenance tool: anti-static wrist strap, extendable length: 3m

Click to view more repair tools

This is an original piece. Reproduction in whole or part without written permission is prohibited.
About miner repair issues, please contact repair manager email:

For business cooperation, please contact:

If you have any dissatisfaction during the transaction or have valuable suggestions for us, please contact us via this email address:
This web uses "cookies" to give you the best experience. Using this website means you are Ok with this. More info about cookies and how to disable them following this link. I Understand