REPAIR TUTORIALS

How to use hash board code editor

20/9/2020

How to use hash board code editor solve antminer hash board not working and no hashing

The principle of the device is to synchronize the hash boards of different serial numbers inside the miners to make them the same as the other two hash boards, so that the miners can start and work normally.

Our method is to first read one of them and save the data, and then write the data to another hash board. After rigorous testing, this method is fast and effective.

——————————————————

Keys and interface description

图片1.png

①  "Ok" button

②  "NF" function button

③  Direction button - ↑

④  Direction button - ↓

⑤  Direction button - ← 

⑥  Direction button - →

⑦  USB power supply interface (5V 1-2A)

⑧  Hashboard data interface

——————————————————

Start operation: read data

Note: Please disconnect the power supply of the mining machine before operation, this operation does not need to supply power to the hash board

First click the "NF" button to enter the function menu

1: Insert the data cable into the hash board that needs to read the data

2: Select (eerpom设定) on the device and click the "OK" button

3: Select (读取eerpom) and click the "OK" button

4: Enter the model you want to mark, then move the cursor to   图片2.png  in the lower right            corner and click the "OK" button to save the data

5:At this point, the device will return to the initial interface

3_副本.jpg

——————————————————

Start operation: write data

First click the "NF" button to enter the function menu

1:Insert the data cable into the hash board that needs to write data

2:Select (eerpom设定) on the device and click the "OK" button

3:Select (打开eerpom) and click the "OK" button

4:Find the data file you just saved and click the "OK" button to confirm

5:At this point, the device will return to the initial interface again, please click the "OK" button again to write the data to the Hashboard

33.jpg

——————————————————

Complete data writing

After clicking the "OK" button, the prompt tone of the device is once, indicating that the writing is successful. The prompt tone is twice, indicating that the writing failed.

Schematic diagram of results:

①: File name

②: Number of successful writes

③: Number of write failures

图片3.jpg

——————————————————

Click to enter: More maintenance tips for miners

Click to enter: Miner repair tools and spare parts

Click to download the miner maintenance information

NOTICE
This is an original piece. Reproduction in whole or part without written permission is prohibited.
About miner repair issues, please contact repair manager email:
[email protected]

For business cooperation, please contact:
[email protected]

COMPLAINTS & SUGGESTIONS
If you have any dissatisfaction during the transaction or have valuable suggestions for us, please contact us via this email address:
[email protected]
This web uses "cookies" to give you the best experience. Using this website means you are Ok with this. More info about cookies and how to disable them following this link. I Understand