L3+ U73 Step-down Module

L3+ U73 Step-down Module
L3+ U73 Step-down Module
1-10 5.36
11-20 5.26
>21 5.16

MOQ: 1 Weight: 0.05 KG

+ Add To Cart
If you dont know how to place an order please check our FAQs

WhatsApp : +8618623251355
Recently, Our customers have reported that someone pretending to be our customer service staff. Please pay attention to the phone number above which is the only WhatsApp of Zeus mining ltd. Any other contact way not on our website was not our responsibility. If you find someone else pretending to us, please email the screenshots to [email protected] immediately and terminate the transaction to avoid loss.
Product description:

L3+ U73 Power Supply Step-down Board

Why use L3+ U73 power step-down module?

If the L3+ power chip is damaged or there is no voltage in the voltage domain, the L3+ U73 module can be used for replacement. The L3+ U73 power step-down module can be used in the L3+ 10V step-down circuit control, on the Hash board with no material, serious oxidation, and lack of material. The module has a total of 8 external solder joints, 4 solder joints do not need to be soldered with wires, and can be connected to 3 external wires (the PIC cannot adjust the voltage) or 4 external wires (the PIC can adjust the voltage).

1. GND: The negative pole of the power supply is grounded

2. 12V: 12V input

3. EN: Power on signal, connected to pin 3 of Q10

4. HG: Controlled by the upper MOS tube, connected to pin 4 of the upper MOS tube

5. LG: Controlled by the lower MOS tube, connected to pin 4 of the lower MOS tube

6. DAOUT: Connect to PIC, can accept PIC voltage regulation

7. FB(mos): Feedback input, connected to the large inductor L2, close to the MOS end

8. SW(out): Connect to the output terminal of the large inductance L2

U73 step-down board

U73 step-down module diagram

L3+ U73 module installation steps:

1. First remove the original IC U73, and use a multimeter to check whether the original 3 MOS tubes have any problems. The normal resistance of the large inductance L2 to ground is about 40 ohms.

2. Put the module on the inductor as above, connect the FB (mos) pad and the SW (out) pad to the inductor, and use an air gun and an electric soldering iron to dissipate heat.

3. Connect GND to the left side of capacitor C943, as shown above.

4. Connect 12V to the right side of capacitor C943, as shown above.

5. Connect the HG signal to the 4th pin of the MOS transistor Q5, as shown in the figure above, pay attention to check whether there is a short circuit.

6. Connect the LG signal to the 4th pin of the MOS transistor Q4, as shown in the figure above, pay attention to check whether there is a short circuit.

7. Connect the EN signal to pin 3 of Q10. If this pin is not connected, it is a forced power-on, which will cause the control board to fail to turn off the power supply of the hash board.

8. Remove the resistor R24, and connect the DAOUT signal to the position shown in the figure R24. If this signal is not connected, the PIC cannot adjust the voltage and can only work with a fixed voltage.

L3+ power supply step-down board

Our Customers and Partners:

We treat our customers and partners as sincere friends and do our best to provide technical support and aftersales service.
Payment method:

How to determine product prices and shipping costs?

When you are ready to buy one or more products. You can consult the sales Manager to get a sample of the proforma invoice. The category, product price, and freight are included.

How to complete the payment?

We have the following payment methods. You can tell our sales Manager which payment you prefer and complete it. After the customer service checks and confirms the payment is completed. Provide the proforma invoice. And we will prepare to ship.

Cryptocurrency Payment

The payment method at the designated address is efficient and practical and can be used anywhere in the world.
Wallet Address
The payment method at the designated address is efficient and practical and can be used anywhere in the world.

Wallet Address

Bank Transfer

Other payment methods

Wire transfer [Hong Kong]
Card Number
Wire transfer [China Mainland]
Card Number

Cooperation express:

Q: When will we ship after payment?
A: In order to ensure that the products we ship are in good condition. Issued approximately 3 days after receiving your payment.

Q: What if the product is damaged during transportation?
A: We will use a more robust package when shipping to avoid damage to the goods, and we can purchase transportation insurance in advance to reduce the loss of in the transport. although this problem is not common.

Q: What payment methods do we support?
A: We support Bank transfer, wire transfer, Western Union, BTC, third party guarantee, letter of credit and Paypal.

Q: What should I do if there is a problem after receiving the products?
A: We have established good relationships with the maintenance departments in many countries around the world. For example Venezuela, Iran, etc. If you have any questions within 3 days of receiving the goods, you can get free repair service.

Q: Which express we support?
A: We will choose one cheapest and fastest transport way for you. and we support DHL, UPS, TNT, Federation, also have special express, such as Russia, the United States, Kuwait, etc.

More FAQs

If you have any questions, please leave us a message.
Leave message

Edoardo 2022/5/11 15:09:11

how much is the cost for one working DR5 hashboard including shipping to Italy?

A:Dear Customer,
We contacted you via e-mail. Please feel free to contact us if needed.
[email protected]
orhan öğüt 2022/5/11 4:19:54
Q:selam ben türkiyede asıc miner tamiratı yapıyorum benimde ismimi yayınlarmısınız
teşekür ederim
A:Sayın Müşteri,
Sizinle e-posta yoluyla iletişime geçtik. Gerekirse lütfen bizimle iletişime geçmekten çekinmeyin.
[email protected]
вы 2022/5/11 2:32:25

A:Уважаемый клиент,
Мы связались с вами по электронной почте. Пожалуйста, не стесняйтесь обращаться к нам в случае необходимости.
[email protected]
Sebastian 2022/5/6 22:43:00
Q:Hi, are they compatible with the antiminer S19 line?
A:Dear Customer,
We have contacted you by email. Please feel free to contact us if necessary.
[email protected]
Cesar 2022/5/4 1:30:30
Q:I got an Avalon 841 hashboard with a missing ceramic capacitor, downside says "C2", do you know that capacitor value? Thank you
A:Dear Sir/Madam, please refer to our FAQ place order, or contact our Pre-sale service via WhatsApp or email. Thank you.
mostafaabbaspor 2022/5/3 18:19:35
Q:Hello Please send me the number of chips with the price
A:Dear customer, what type of chip do you need? I offer you a quote. We have contacted you by email, please feel free to contact us if you need it.
Matt 2022/5/2 22:51:36
Q:I am looking for a 14 pin ribbon cable for a Avalon 1246, is that an item you have?
A:Dear customer, we have contacted you by email. Or you can directly contact our FAQ place order, or contact our Pre-sale service via WhatsApp. Thank you.
Kylie Hamilton 2022/4/29 1:47:54
Q:What type of power supply is needed to use through the PC mode switch. I used the original power supply first and realized later that it said it's an essentially invalid way to test a hashboard.
A:Dear Sir/Madam, please follow our FAQ and contact us after-sale service for support. thank you.
Ryan 2022/4/28 7:03:29
Q:Do you repair antminer s15 hashboards?
A:Dear customer, it is a pity that we cannot provide hash board repair services. Please feel free to contact us if you have any product needs.
jim 2022/4/24 15:16:51
Q:product deliver to malaysia will take how long?
A:Dear customer, it will take about a week.







About products purchase, please contact our sales manager:
[email protected]

About miner repair and after-sale issues, please contact the repair manager email:
[email protected]

For business cooperation, please contact:
[email protected]

If you have any dissatisfaction during the transaction or have valuable suggestions for us, please contact us via this email address:
[email protected]
Here is a list of scammers who scamming our customers, if you are chatting with them, please stop chat and let us know immediately:

The scammers will change the accounts when they know they are exposed. So please be sure we only have these legal contact accounts which this page: https://www.zeusbtc.com/Contact-us.asp