ZEUS MINING
CRYPTO MINING PRO

How to overclock the new firmware of Antminer T9+ and S9 series with BTC.com mining pool batch management tool?

Bitmain released a new firmware for overclocking that supports S9, S9i, S9j, and T9+ model miners a few days ago. The new firmware will enable overclocking to increase the hash rate and multiple effect options for hash rate and power consumption in underclocking mode. Miners can enter the firmware download page through [Customer Support] - [Firmware] on Bitmain's official website, or copy and jump to the following link to select the corresponding model:

https://service.bitmain.com.cn/support/download?product=ANTMINER%20T9

firmware download page 

At the same time, to facilitate miners and friends to configure the new version of the overclocking firmware in batches, the BTC.com mining pool has also made a new version of the batch management tool for everyone. The following is a freshly released tutorial!

Download the new version of the BTC batch management tool

First, please go to the mining pool homepage to download the latest BTC mining pool batch tool (version V1.2.3 and above);

Download method: Mining Pool Homepage--Pool Service--Tools & Software

https://pool.btc.com/tools

BTC batch management tool download page 

Batch upgrade tunable firmware

1. Configure the miner's IP address and scan the miner;

2. After successfully scanning the miners, you can upgrade the FM firmware;

firmware upgrade page 

3. Select the miner model to be upgraded and the local location of the FM firmware;

4. Click "Upgrade All" or "Upgrade Selected" and wait for the miner to complete the firmware upgrade.

firmware upgrade progress bar 

Batch configuration of overclocking options

1. After the upgrade is successful, the default working mode is Normal, that is, the default non-overclocking gear;

firmware success page 

2. The configuration will take effect only after checking "Overclocking / Underclocking";

3. Select the miner model and options to be overclocked. Options: Different overclocking levels supported by this firmware;

4. Click "Configure All" or "Configure Selected" to change the configuration and wait for the miner to configure successfully.

firmware overclocking gear selection 

Handling of bulk firmware upgrade or configuration failures:

1. Increase the upgrade timeout period; for example, it can be changed to 500 seconds. Increase the batch success rate by increasing the waiting timeout time;

2. Reduce the number of upgraded miners as appropriate. For example, it can be reduced to 2. Reducing the number of processes running simultaneously in batch tasks can avoid LAN congestion and cause upgrade failures.

Batch upgrade miner page 

 


0
About products purchase, please contact our sales manager:
[email protected]

About miner repair and after-sale issues, please contact the repair manager email:
[email protected]

For business cooperation, please contact:
[email protected]

COMPLAINTS & SUGGESTIONS
If you have any dissatisfaction during the transaction or have valuable suggestions for us, please contact us via this email address:
[email protected]
Attention!

Recently, many companies claiming to be mining companies imitate us and say that they are related to us, or that they are our branch companies, which has caused customers to be deceived. Please be careful not to believe any impostors, please check our correct contact information and beware of being deceived getting scammed, and losing money.
please check our right contact way: Here

CLOSE