Summary table of the functions of each valve and pressure gauge of AntSpace HK3 V2 container

No.

Name

Function

State

1. 

1# ball valve

Valve for drain

Normally closed

2. 

2# ball valve

Main line drain valve

Normally closed

3. 

3# ball valve

Main line drain valve

Normally closed

4. 

4# ball valve

Safety valve, when the safety valve fails, the valve can be closed for inspection.

Closed when pressed, the rest usually are open.

5. 

5# ball valve

The valve at the front of the rehydration filter, closes this valve when the filter is overhauled.

Normally open

6. 

6# ball valve

Open the water tank refill valve to refill the inside of the water tank.

Normally closed

7. 

7# ball valve

Internal system rehydration valve in the pipeline; open this valve to refill the system.

Normally open

8. 

8# ball valve

The water tank is connected to the system valve, open this valve, and the water tank is connected to the internal system of the pipeline and can be automatically replenished or discharged.

Normally open

9. 

9# ball valve

The liquid replenishment inlet of the whole system and the liquid discharge outlet of the water tank. Open this valve to replenish the external liquid into the system/water tank; open this valve when the liquid is discharged, and the liquid inside the water tank will be discharged.

Normally closed

10. 

10# ball valve

Expansion tank valve, close this valve when overhauling the expansion tank.

Closed when pressed, the rest usually are open.

11. 

11# ball valve

The exhaust valve is at the top of the degassing tank; close this valve when overhauling the exhaust valve here.

Normally open

12. 

12# ball valve

Exhaust valve, close this valve when overhauling the exhaust valve here.

Normally open

13. 

13# ball valve

External Y-strainer valve, open when overhauling the filter and draining.

Normally closed

14. 

1# welded butterfly valve

Bypass valve, open when the ambient temperature is low to allow internal circulation.

Normally closed

15. 

2# welded butterfly valve

The valve of the left water distributor of the liquid return cooperates with the 4# welded butterfly valve to isolate the left water distributor assembly.

Normally open

16. 

3# welded butterfly valve

The valve on the right side of the water separator for the return liquid cooperates with the 5# welded butterfly valve to isolate the left side water separator assembly.

Normally open

17. 

4# welded butterfly valve

The valve of the left water distributor of the liquid supply cooperates with the 2# welded butterfly valve to isolate the left water distributor assembly.

Normally open

18. 

5# welded butterfly valve

The valve of the right water distributor of the liquid supply is matched with the 3# welded butterfly valve to isolate the left water distributor assembly.

Normally open

19. 

6# welded butterfly valve

Container liquid supply valve, closed when moving and transporting, independent water-cooled container system, can cooperate with 8# welded butterfly valve to maintain the filter, the system does not need to discharge a lot of liquid.

Normally open

20. 

7# welded butterfly valve

Container liquid return valve, closed when moving and transporting, independent water-cooled container system.

Normally open

21. 

8# welded butterfly valve

Cooling tower liquid supply valve, closed when moving and transporting, independent cooling tower, can cooperate with 6# welded butterfly valve to maintain the filter, the system does not need to discharge a lot of liquid.

Normally open

22. 

9# welded butterfly valve

Cooling tower liquid return valve, closed when moving and transporting, independent cooling tower.

Normally open

23. 

1# pressure gauge

The pump suction pressure gauge can judge whether the pump suction pressure (≥0.1MPa) is normal and can check whether the pump suction pressure sensor is normal.

/

24. 

2# pressure gauge

The outlet pressure gauge of the pump, together with the 1# pressure gauge, can analyze whether the pump's operating conditions are consistent with the design conditions (the difference is the pump head at this time).

/

25. 

3# pressure gauge

The pressure gauge of the main liquid supply line cooperates with the 2# pressure gauge to analyze whether the outlet pressure of the water pump is normal and whether there is any fault in the system.

/

26. 

4# pressure gauge

The pressure gauge of the left branch pipe of the liquid supply and the 6# pressure gauge can analyze whether the flow resistance of the left water distributor assembly is normal.

/

27. 

5# pressure gauge

The pressure gauge of the right branch pipe of the liquid supply and the 7# pressure gauge can analyze whether the flow resistance of the right water distributor assembly is normal.

/

28. 

6# pressure gauge

The pressure gauge of the left branch pipe of the liquid supply and the 4# pressure gauge can analyze whether the flow resistance of the left water distributor assembly is normal.

/

29. 

7# pressure gauge

The pressure gauge of the right branch pipe of the liquid supply and the 5# pressure gauge can analyze whether the flow resistance of the right water distributor assembly is normal.

/