Stainless steel blades for PCB repair and cutting

Product description

This multi-functional industrial-grade blade set is a highly efficient auxiliary tool for ASIC miner repair and maintenance. The #11 pointed blade can precisely strip miner cables, clean residual thermal grease from heatsinks, and cut insulating adhesive and thermal pads. The #23 wide blade can quickly trim burrs on the miner's casing and cut thermal conductive materials and wire harness sheaths. The stainless steel non-slip handle provides a stable and effortless grip, and the included storage box facilitates carrying and storage during mining operations. It easily handles delicate operations such as miner cleaning, circuit board repair, and thermal material replacement, contributing to efficient miner maintenance.

Key features of the multi-functional blade set:

1. Material and craftsmanship, industrial-grade durability standards;

· Handle material: Thickened stainless steel, one-piece molding, non-slip knurled surface, stable grip, comfortable for extended use, and less prone to slipping; rust-resistant and corrosion-resistant, can be repeatedly cleaned and used.

· Blade material: Selected high-carbon steel/stainless steel blades, precision cryogenic treatment, high edge hardness and toughness, less prone to chipping and curling, maintaining consistent cutting sharpness.

• Combination Configuration: Includes one #3 handle for #11 blades and one #4 handle for #23 blades, along with multiple spare blades to meet long-term usage needs.

2. Dual Blade Sizes, Clearly Defined for Different Uses;

• #11 Blade (Fine Tip): Sharp and precise tip with a delicate edge, suitable for high-precision operations such as electronic component repair, ribbon cable stripping, cutting insulating adhesive, and finely scraping solder joints.

• #23 Blade (Wide Blade, Long Blade): Wide blade with a longer edge, suitable for large-area cutting/rough machining, cutting ABS/acrylic sheets, wood, and plastic sheets.

3. Includes Storage Box for Safety, Portability, and Convenience;

• A free metal storage box is included, which can store both the handle and spare blades, protecting them from dust and moisture and preventing accidental cuts from exposed blades; its compact size makes it easy to carry or store in a toolbox, keeping your workspace tidy.

Installation demonstration:

1. Prepare the corresponding blade size, clamp it securely (you can use your hand or tweezers, tweezers are recommended to avoid injury).

2. Slide the blade diagonally onto the handle head, then slowly straighten it.

3. Completely fit the blade hole onto the handle head, carefully controlling the force and angle.

4. After inserting the blade, press the end to lock it in place. Tweezers are recommended.

Safety Instructions:

1. The blade is extremely sharp. Please use tweezers to assist in installing/removing the blade, avoiding contact with the cutting edge with bare hands. Wear protective gloves during operation.

2. Do not use for cutting extremely hard metals, stone, or other materials to avoid chipping or damaging the blade.

3. After use, wipe clean and place in the storage box, out of reach of children.

Product display

Product composition

Stainless steel handle for #11 blades ×1

Stainless steel handle for #23 blades ×1

#11 blades ×10

#23 blades ×10

Metal storage box ×1

Related product:

Workpro retractable utility knife

Craft Knife