Miner Repair
FNIRSI-1013D Digital Tablet Oscilloscope Dual Channel 100M Bandwidth 1GS Sampling Rate
1 units $168

Chat Now:
WhatsApp : +8618623251355
Notice!
Recently, Our customers have reported that someone pretending to be our customer service staff. Please pay attention to the phone number above which is the only WhatsApp of Zeus mining ltd. Any other contact way not on our website was not our responsibility. If you find someone else pretending to us, please email the screenshots to [email protected] immediately and terminate the transaction to avoid loss.

FNIRSI-1013D Digital Tablet Oscilloscope Dual Channel 100M Bandwidth 1GS Sampling Rate Mini Tablet Digital Oscilloscope

1 (1).jpg

Features:
Screen:Fully fitted 7 "800*480 resolution color TFT LCD display, bright color, high contrast;The touch is a capacitive touch screen, just like a pad touch on a modern mobile phone, not a resistive touch screen operated by an ancient fingernail
Dual input: Has two input channels, the input impedance of 1 m ohm, can measure 2 different set of signals at the same time, to the input signal in the 2 groups were compared to judge to analyze problems, such as power amplifier unit of input and output signal of the contrast analysis to test the character of magnification and distortion degree, and the output resistance, full bridge or half bridge switching power supply complementary PWM signal test, such as relative to single channel has more extensive applicability
Intelligent anti-burning: the two input channels have built-in high-voltage protection modules, which can tolerate up to 400V voltage input. There is no need to worry about the loss of oscilloscope caused by the probe not being moved to 10x position due to the high voltage measurement
Complete trigger function: with automatic, single, normal three trigger modes, single trigger mode to test the sudden aperiodic burst signal, such as the car ignition signal;Normal trigger mode to test aperiodic digital logic signals, such as infrared remote control signals;Automatic trigger mode test cycle analog signal, such as sinusoidal signal;Wide range of uses
One-key: Automatic adjustment does not need tedious manual adjustment, one-key automatic adjustment;The adjusted waveform appears in the center of the screen (when the dual channels are started, channel 1 is in the top half of the center, and channel 2 is in the bottom half of the center). The time used is short. It takes only 1 second to automatically adjust the signal of 1V peak and peak value, while it takes about 5 seconds for a typical desktop oscilloscope.The larger the range of the measured signal, the shorter the adjustment time

Note: The project will send the English version by default

1 (2).jpg

1 (4).jpg


Specification
Material: Plastic, electronics
Color: Black
Size(L x W x H): About 184mm x 124mm x 50mm
Model: FNIRSI 1013 d
Maximum test voltage: 1x:40V 10X: 400V
Channel number: 2
Cursor type: horizontal x, horizontal Y, trigger Y
Screen size :7"
Battery: 6000mah rechargeable battery(built in)
Scrolling mode: supported
Screen resolution :800 x  480
One-click AUTO: support
Display process :TFT
Waveform storage: 11,000 screenshots + 1,000 sets of waveform
Analog bandwidth :100MHz
Waveform manager: supported
Maximum sampling rate :1GS/s
Voltage accuracy :± 2%
Time of rise :< 3ns
Frequency accuracy :± 0.01% accuracy
Storage depth :240Kbit
Measurement parameters: a total of 12
Input impedance :1MQ
Vertical sensitivity: 50mv-500v
Standby time :4 hours
Time base range :50S 10ns
Extended interface :USB transfer interface
Trigger mode: single/normal/automatic
Charging requirements :5V 2A/3A/4A
Trigger edge: rising edge/falling edge
Coupling mode: AC/DC

333 (1).jpg

333 (3).jpg

Package included:

1pc x oscilloscope

2pcs x matched 100MHz probe (1X and 10X)

1pc x USB data cable 

1pc x user manual (English)


Related maintenance tools:

Antminer New version of multi-function test fixture

Official thermoset gel 220g

BM1387 tin tool, high temperature resistant composite material

related articles:

Solution of mixed hashboard miner error

Antminer S9se S9k S11 S15 T15 S17 T17 S17+ T17+ S17E T17E Reasons for not starting

Click to see more miner maintenance tools


We treat our customers and partners as sincere friends and do our best to provide technical support and aftersales service.

How to determine product prices and shipping costs?

When you are ready to buy one or more products. You can consult the sales Manager to get a sample of the proforma invoice. The category, product price, and freight are included.

How to complete the payment?

We have the following payment methods. You can tell our sales Manager which payment you prefer and complete it. After the customer service checks and confirms the payment is completed. Provide the proforma invoice. And we will prepare to ship.

Cryptocurrency Payment

The payment method at the designated address is efficient and practical and can be used anywhere in the world.
Wallet Address
The payment method at the designated address is efficient and practical and can be used anywhere in the world.

Wallet Address

Bank Transfer

Other payment methods

Wire transfer [Hong Kong]
Card Number
Wire transfer [China Mainland]
Card Number

Cooperation express:

Q: When will we ship after payment?
A: In order to ensure that the products we ship are in good condition. Issued approximately 3 days after receiving your payment.

Q: What if the product is damaged during transportation?
A: We will use a more robust package when shipping to avoid damage to the goods, and we can purchase transportation insurance in advance to reduce the loss of in the transport. although this problem is not common.

Q: What payment methods do we support?
A: We support Bank transfer, wire transfer, Western Union, BTC, third party guarantee, letter of credit and Paypal.

Q: What should I do if there is a problem after receiving the products?
A: We have established good relationships with the maintenance departments in many countries around the world. For example Venezuela, Iran, etc. If you have any questions within 3 days of receiving the goods, you can get free repair service.

Q: Which express we support?
A: We will choose one cheapest and fastest transport way for you. and we support DHL, UPS, TNT, Federation, also have special express, such as Russia, the United States, Kuwait, etc.

If you have any questions, please leave us a message.
Leave message



Владимир 29/8/2020 19:17:38
Q:Здравствуйте! Я из Казахстана, у нас нет официальных сервисных центров. Как можно открыть в Казахстане сервис, есть у Вас возможность обучиться и обслуживать и ремонтировать аппараты?
A:Здравствуйте, пожалуйста, добавьте персонал службы поддержки клиентов WhatsAPP: +8618623251355
Ariankys Quintero 7/8/2020 22:29:23
Q:Hello, I would like to buy some products, I sent the list by WhatsApp two days ago but I have not received a response
A:Hello, my friend, we have received your feedback, please confirm the correct WhatsAPP number: +8618623251355, this is a special number used by our company
Andre 7/8/2020 20:12:16
Q:Dear Zeusmining.
Who can I contact to obtain a quote and order.

A:Hello dear friend, please contact WhatsAPP: +8618623251355, thank you
Ernesto Tovar 30/7/2020 2:53:10
Q:Hello im from Venezuela, i want to buy some parts for repair, for example. pcie conectors, fans, cables, etc. I just want to know from where you send those parts. China? USA? Other?
A:Hello, sending from China, you can add WhatsAPP: +8618623251355 for more information
Simon Mallinson 13/7/2020 0:10:27
Q:Dear Sirs,
I hope that you are well? I would like to buy an APW 8 psu for Antminer S11 10-11 volts, can you tell me cost of postage please?

Kind Regards
Simon
A:Hello my friend, where do you want to send it? Please add Customer Service Commissioner WhatsAPP: +8618623251355
MASAMI SUZUKI 28/6/2020 20:32:47
Q:Please tell me the next amount
1.New version of multifunctional test fixture Universal test fixture Antminer S17e T17e 1units
2.Official fan 4cm x 4cm x 2.8cm 12V Miner power fan 20units
3.New universal test fixture kit, including new models such as S17+ S17e T17+ T17e  ×1
4.Original Antminer official fan 12cmx12cmx3.8cm 12V 2.7A 10units
5.MOS chip for fix hash board 0 hash rate 10units
6.Repair tool: 1000 times electron microscope, 4.3 inch screen 1units
7.10 pieces Antminer BM1393CE chip is suitable for: S9se S17e T17e S17+ T17+ 10pcs
Please tell me the price including shipping to Japan

A:Hello my friend, please add WhatsAPP: +8618623251355, in addition we have sent the list to your email
MASAMI SUZUKI 27/6/2020 6:05:06
Q:Please tell me the email address for ordering and inquiries.
A:Hello my friend, the email address is: [email protected]
You can also contact us via WhatsAPP: +8618623251355
Claudio Da Costa 7/6/2020 20:08:02
Q:do you have stock on APW9+ power supply and can you ship to South Africa?
A:Hello my friend, currently in stock, please add WhatsAPP: +8618623251355
dhika 28/5/2020 21:30:57
Q:hello my lord Dhika, from Medan City. Indonesia may I ask please help me instructions, how to dowloand Antminer Chp software .. Xshell 5 programs ... how to dowloand ,,, install from the beginning in detail sir thank you as much ... for help the master gave
A:Hello friends, please pay attention to the tutorial column of the website. There are detailed introductions and instructions
MASAMI SUZUKI 18/5/2020 17:41:18
Q:Is it possible to use e-maill instead of WhatsAPP?
I'm not using WhatsAPP.
A:Of course my friend, what do you need?
OMNI


COPY

ERC20


COPY
About miner repair issues, please contact repair manager email:
[email protected]

For business cooperation, please contact:
[email protected]

COMPLAINTS & SUGGESTIONS
If you have any dissatisfaction during the transaction or have valuable suggestions for us, please contact us via this email address:
[email protected]
This web uses "cookies" to give you the best experience. Using this website means you are Ok with this. More info about cookies and how to disable them following this link. I Understand