Iceriver KS3M KS3L KS3 water cooling plate kit

Product description

Iceriver KS3 KS3M KS3L liquid cooling plate is made of aluminum. A complete water-cooled plate kit contains 3 integrated water-cooling boards, cooling liquid shunts, water pipes, a cover plate, connectors, and so on, which are used to cool the miner's hash board. The water block for miners can help the ASIC chip dissipate heat better, reduce a series of malfunctions caused by miners due to heat dissipation problems, and improve the mining efficiency of miners. The KS3L Aluminum water block is easy to install and maintain. Its working principle is to drive liquid circulation through a water pump, thereby taking away the heat emitted by the hash board ASIC chip. After installing the water-cooled heat sink radiator, the miner has the characteristics of low noise, energy saving, environmental protection, and less loss of components, making it the first choice for home mining.

3 piece water cooling plate of KS3 KS3M KS3L miner:

In addition, we will also give away a random number of 8mm pneumatic plugs and pipe caps, which can be used to plug the water cooling plate quick connector or bellows when replacing the water cooling plate or repairing the hash board to avoid leakage and waste of water cooling liquid.

6 piece water cooling plate of KS3 KS3M KS3L miner:

Detailed introduction:

1) Iceriver KS3 KS3M KS3L water cooling block

Three integrated aluminum water-cooling plates cool the three hash boards of the KS3 KS3M KS3L miner. These plates are corrosion resistant, have good air tightness, and are fast in heat dissipation.

2) ASIC miner cooling water separator

The water separator is an essential accessory for installing the water-cooling plate. It connects the water pipes of the hash boards and reduces the clutter of the water pipe layout of the refit water-cooled miners.

3) ASIC miner water cooling tube connector

The connector is used to connect the water distributor and the water pipe, ensuring the airtightness of the water pipe connection and avoiding the overflow of liquid.

4) Cover plate

The cover plate is used to fix the water distributor and miner and prevent particles or insects from entering and affecting the miner's normal operation.

5) ASIC miner water cooling tube

This 3 piece water cooling plate kits contains 6 corrugated pipes, with diameters of 8mm, respectively, for transmitting cooling liquid.

6) Screws

Used to secure the baffle.

For purchasing the KS3L KS3M water cooling system retrofit kit (with 12.8KW radiator), you will receive not only the water cooling plate but also the following products:

1) Arctic MX-6 thermal compound 8g

2) 12.8KW water cooling radiator

3) Iceriver fan speed simulator fan spoofer

Due to the paste being a sensitive good and its transportation being restricted, it will be shipped separately using sensitive goods channels, and the delivery time will be slightly longer 8 to 20 working days.

This product installation details article: Iceriver KS3M miner upgrade water cooling tutorial.