Antminer universal chip fixture test fixture

Product description

Antminer chips fixture / Antminer test fixture / hashboard tester / Multifunctional test fixture

This Antminer universal hash board constant temperature test fixture is used to test the hash board ASIC chip status on the Antminer S21XP, S21+ Hydro, L9, S21Pro, S21 Hydro, T21, KS5PRO, KS5, KS3, S19Pro Hydro, S19Pro+ Hydro, S21, KA3, HS3, K7, D7, L7, S19kpro, S19XP, S19XP Hydro, S19Pro, T19 Hydro, S19 Hydro, S19jpro, S19j, S19+, S19jpro+, T19, S19, S19i, S17+, S17e, S17, S17pro, T17+, T17e, T17, S15, T15, Z15, S11, S9se, S9k, S9j, S9i, T9+, T9, Z9, Z9mini, S9, etc. to help us quickly repair and replace hash board chips. At the same time, the Antminer test fixture is one of the essential tools for repairing the Antminer hash board.

Advantage of test fixture:

1. The fixture is independently developed and sold by ZEUS MINING;

2. Accurate and efficient: quickly troubleshooting the faulty chip and greatly reduce the inspection time;

3. Wide range of test models: Applicable to most Antminer hash boards, and need to be tested with the test files of the corresponding models;

4. Wide range of troubleshooting: in addition to ASIC chip failure, it can also be used to troubleshoot temperature sensor failure, boost failure, LDO failure, CRC hash rate failure, etc.;

5. LED high-definition display: clear display, real-time view of troubleshooting results;

6. Can be connected to a computer: connect the fixture and the computer via a USB to TTL cable to view the hash board fault log fully.

7. Solid appearance: The top is made of an acrylic shell, surrounded by support frames, and the mainboard is fixed with hot melt adhesive, which can effectively avoid bumps and cause internal components to loosen and be damaged.

8. Insulation treatment: The power part of the mainboard is treated with conformal coatings insulation glue to effectively prevent damage caused by accidental touch during the test.

Connection port diagram:

① TF card interface

② Ring 12V power interface

③ Test data line interface

④ Voltage regulation line interface (used when testing combined miners)

⑤ USB—TTL interface

⑥ 12V miner power connector

Product composition

Only test fixture part lists:

With 4x120mm cooler fan part lists:

With KPS3030D PSU and voltage regulating board part lists:

Effect display

There are two method to use and connect the Antminer universal constant temp chip fixture test fixture:

The first method:

① and ② red and black alligator clip power cable: connect the positive and negative electrodes of the test fixture and the hash board respectively;

③ Test fixture cable: connected to the test fixture and hash board;

④ 4pin voltage regulation cable: connected to the Antminer original power supply and the fixture;

⑤ USB to TTL cable: connected to the tester and the computer;

⑥ 12V powering interface: used to powering the fixture.

The second method:

① and ② red and black alligator clip power cable: connect the positive and negative electrodes of the test fixture and the hash board respectively;

③ Test fixture cable: connected to the test fixture and hash board;

④ USB to TTL cable: connected to the tester and the computer;

⑤ 4pin voltage regulation cable: connected to the Antminer tester voltage regulating board and the fixture;

⑥ Test fixture data interface: connected to the Antminer tester voltage regulating board;

⑦ 12V powering interface: used to powering the fixture.

Please refer to the following articles for usage:

New version of multifunctional test fixture manual

Click to: Antminer test fixture TF data card

Important:

If the test fixture is damaged due to the following reasons, we do not provide after-sale service:

1. Connect to the network interface of the main control board of the test fixture to cause damage to the test fixture;

2. The fan interface on the main control board of the test fixture cannot be used. If unauthorized use causes damage to the test fixture, we will not provide after-sales service.

Antminer test fixture manual for Antminer T17

Antminer test fixture manual for Antminer S17

Antminer test fixture manual for Antminer T15

Antminer test fixture manual for Antminer  S15

Antminer test fixture manual for Antminer S11

Antminer test fixture manual for Antminer S9se

Antminer test fixture manual for Antminer S9k

Antminer test fixture manual for Antminer S9j

Related maintenance tools:

Antminer test fixture with screen offline version

Antminer Test Fixture for S9 T9+ S9k S9se

PicoBT Multifunctional Hash Board Tester

Avalon test fixture A320X-F for 10 11 12 13 series

Click to see more miner Test Fixture